TMA for HP OpenView
  • HP OpenView module for the management of Telindus equipment
  • Multiple management transport protocols
  • User-selectable alarm levels
  • Interactive pictures

Telecommunication networks evolve from year to year, and increasingly people rely on these networks for conducting their business. As a result, performance and reliability of these infrastructures have become an essential requirement in today’s world.

TMA (Telindus Management Application) for HP OpenView meets all these requirements by providing a powerful management tool for Telindus access equipment. TMA for HP OpenView supports permanent performance monitoring of each network element (alarms, status and statistics), network element configuration, and operator initiated actions (such as testing).

All alarms on each individual network element are immediately logged in the HP OpenView event-log, and the HP OpenView icon on the map reflects the resulting status. For this purpose, TMA for HP OpenView fully supports the HP OpenView alarm levels (warning, minor, major, critical). The operator can configure these alarm levels for each individual alarm condition. The status of all network equipment is also easily visualised by an interactive picture (including LED and push-button status), where colour-codes allow for a quick identification of the cause of potential network trouble.

A user-friendly menu enables the configuration of any individual network element. When activating configuration consistency, the management keeps the network element configurations completely consistent with centrally stored configuration profiles, even when a network element is replaced. Similarly code consistency allows keeping Flash code consistent with centrally stored firmware versions.

Integration with the HP OpenView Event-Log

All Telindus equipment supports a private SNMP MIB. It is ideal for performance monitoring based on the polling of different parameters (e.g. noise level, line attenuation). The HP OpenView platform provides the ability for representation of these polling results in graphical format. TMA for HP OpenView integrates seamlessly with third-party management modules, making it possible to integrate the management of Telindus modem and third-party router equipment, for example, on the same platform.

TMA for HP OpenView uses TCP/IP connectivity to address the Telindus equipment. Each network element may or may not be identified by an IP address. Some units (such as the Crocus inverse multiplexer) have a direct Ethernet port, whilst other units (such as the Aster and Crocus modem ranges) are connected to a controller device (Orchid 1003 LAN) which acts as an TCP/IP proxy. Only centrally installed modem equipment is connected to the Orchid 1003 LAN. An out-band auxiliary channel on the modem-link is used to give management access to remote equipment. Also more complex configurations such as management on extended links are possible.

In the case of management through an Orchid 1003 LAN, this controller can encapsulate the IP management traffic directly into X.25 SVC’s, Frame Relay PVC’s or PPP. This allows the transport of the management information over a packet switched backbone, without the need for an overlay network.

TCP/IP connectivity of management traffic

TMA for HP OpenView auto-discovers very quickly all network elements defined on the Orchid 1003 LAN. On the map, the network elements get always their name as it has been assigned on the Orchid 1003 LAN.


Minimal system requirements

  • Sun workstation

Sun Solaris 2.5, 2.6

HP OpenView Network Node Manager 5.X, 6.X

  • HP-UX workstation

HP-UX 10.20, 11.0
HP OpenView Network Node Manager 5.X, 6.X

  • IBM Compatible PC

Windows NT 4.X
HP OpenView Network Node Manager 5.X, 6.X

Alarm notification

  • Alarm transport protocol
SNMP or proprietary
  • Alarm levels
5 (normal, warning, minor, major, critical)

Management interconnectivity

  • TCP/IP (direct 10Base-T connection)
  • X.25 SVC RFC 1356(1)
  • PPP RFCs 1332,1661,1994(1)
  • Frame-Relay PVC RFC 1490(1)

(1)With Orchid 1003 LAN


  • Individual network element configuration
  • Configuration and Code consistency of managed devices
  • Interactive picture of every network element
  • Alarm notification with user-selectable severity
  • Alarm filtering on different levels
  • Coupling of alarms to the HP OpenView map
  • Private MIB for continuous performance monitoring

Sales Codes

Sun Solaris operating system

  • 156685 TMA_HP/OV SUN SOLARIS ENTRY LEVEL VER. (up to 250 Telindus devices)
  • 156686 TMA_HP/OV SUN SOLARIS UNLIMITED VER. (more than 250 Telindus devices)
  • 156687 TMA_HP/OV SUN SOLARIS CLI. (Command Line Interface: optional)

HP-UX operating system

  • 162845 TMA_HP/OV HP-UX ENTRY LEVEL VER.. (up to 250 Telindus devices)
  • 162842 TMA_HP/OV HP-UX UNLIMITED VER. (more than 250 Telindus devices)

Windows NT operating system

  • 156689 TMA_HP/OV WINDOWS NT ENTRY LEVEL VER. (up to 250 Telindus devices)
  • 156690 TMA_HP/OV WINDOWS NT UNLIMITED VER. (more than 250 Telindus devices)
  • 156688 TMA_HP/OV WINDOWS NT CLI. (Command Line Interface: optional)

Demo Version (Sun Solaris and Windows NT)

156986 TMA_HP/OV WINDOWS/SOLARIS DEMO VER. (Max 8 Telindus devices)

About Us
| Contact Us | Site Map | Feedback |Career