Key Features and Benefits
Simple Configuration
CPE operation Type (CO, RT) can be changed via DIP Switch and also configurable transmission data rate.
Voice Enabled
Send data and talk over the same line.
Forwarding Rate on Remote Link
Min 256 x 64 byte packets/sec
Transmission Rate Control
Allow s service providers to allocate data rates from 256 K B to 2.3 MB in increments of 128 KB.
Transmission Rate can be set via DIP Switch
*** Please see Transmission Data Rate reference table on next page
Sc alability & Investment Protection
Supports unlimited users by connecting the - SDSL -CPE via e xternal switch. Enable s Internet using existing copper phone wires without special line installation, and integrated voice/data in a single product.
|
The SDSL-CPE is a powerful, high performance External-SDSL-Modem that delivers configurable line rates up to 2.3 MB (symmetrical) -- comparable to an E1 connection -- over a distance of 5 Km. Its incremental transmission speed (256K to 2.3 MB, in 128 KB increments) allows service providers to adjust for traffic. The - SDSL-CPE provides optional support for splitter equipment that combines voice calls and Internet on the same phone line with no reconfiguration required. The cost- effective - SDSL-CPE features Back to Back connection like a Bridge.
Technical specifications
Item |
SDSL-CPE |
Processor |
80C32, 11MHz |
Flash Memory |
64KB |
DRAM Memory |
1MB |
EthernetPort |
One 10BASE-TX, (RJ-45) , IEEE 802.3 |
SDSL Interface |
1 port (RJ-11), Modulation : 2B1Q, Encapsulation : HDLC |
Voice |
Not in built (External Voice Splitter required) |
ConsolePort |
NA |
Power Supply |
90~260V, 50/60 Hz,
AC Adaptor |
Power Dissipation (W) |
3 |
Operating Temperature ( °C/ °F) |
0~50 / 32~122 |
Storage Temperature
( °C/ °F) |
-40~70 / -40~158 |
Operating Humidity (%) |
0~90, non condensing |
Dimension (mm/inch) |
89(W) * 122(D) * 30(H) / 3.50(W) * 4.80(D) * 1.18(H) |
|